What is a trip permit?

A trip permit is a short-term, single-crossing commercial vehicle credential that authorizes a carrier to operate in a state without enrolling in that state's full weight-distance or fuel-tax program. Most trip permits are valid for 72 hours, cover fuel and weight-distance use tax for the duration, and are issued digitally. Trip permits are the right choice for occasional out-of-state loads; carriers running a state regularly should register for the recurring account instead.

Who needs a state trucking permit?

Any commercial motor carrier operating in a state that imposes its own highway use, weight-distance, or intrastate operating authority above the federal USDOT/MC authority needs a state permit. This includes any truck over 18,000–60,000 lbs entering NY, KY, NM, CT, or Oregon (weight-distance states), any for-hire carrier operating intrastate in California, Texas, or Ohio, and any vehicle crossing a state for a single trip without an existing account (trip permit). Private carriers, owner-operators, and fleets are all covered.

How much does a trip permit cost?

A 72-hour state trip permit filed through Fast Permit Filing is $85 per permit, flat, with no hidden fees. That covers our preparation and filing work plus the state agency fee, and credentials are delivered digitally. Single-state weight-distance registrations (like NY HUT or KYU) start at $75. Multi-state bundles — such as the Big Four (NY + KY + NM + CT) at $149 — are cheaper per state than individual filings.

How long does a state permit take to process?

Most orders placed before 2:00 PM ET are filed the same business day. 72-hour trip permits are typically delivered within a few hours because the issuing states use digital portals. Weight-distance accounts (NY HUT, KYU, NM WDT, CT HUT) are usually active within one to three business days depending on state agency provisioning. Credentials are emailed as soon as the filing is processed — you can forward them straight to your driver.

What happens if I operate without a state permit?

Operating a commercial vehicle without the required state permit is enforceable at weigh stations and ports of entry. Penalties typically start at $500 and escalate to $25,000 per violation depending on the state and load. Enforcement can also place your vehicle out-of-service, which kills the revenue on your load, and the citation is reported to FMCSA where it weighs on your CSA safety score. Repeat offenses compound quickly.

What is the NY HUT and who needs it?

The New York Highway Use Tax (HUT) is required for motor vehicles with a gross weight over 18,000 lbs using New York public highways. All interstate and intrastate carriers operating in NY must register before their first New York trip.

What is a KYU permit?

The Kentucky Unified Carrier (KYU) permit is required for vehicles over 59,999 lbs operating on Kentucky roads. It is a weight-distance tax separate from IRP registration and must be obtained before any Kentucky operations.

What states have weight-distance taxes?

Five US states impose weight-distance or highway use taxes in addition to IFTA fuel tax: New York (HUT), Kentucky (KYU), New Mexico (W&D Tax), Connecticut (HUT), and Oregon (Weight-Mile Tax). All carriers operating in these states must register separately.

Do I need CA# and a Motor Carrier Permit in California?

Yes. California requires two separate permits: a CA Operating Authority number from the CHP (required for for-hire intrastate carriers) and a Motor Carrier Permit from the CA DMV (required for all carriers operating in California). Our California Gold package covers both in one filing.

What is the difference between a trip permit and a weight-distance registration?

A weight-distance registration is an ongoing account that allows unlimited travel in a state - you pay taxes based on mileage each quarter. A 72-hour trip permit is a one-time, short-term permit for a single crossing. Carriers operating regularly in NY, KY, NM, or CT should register; occasional crossings can use trip permits.

What trucking permits do I need as a new carrier?

New commercial carriers typically need several state trucking permits depending on their operating lanes. At minimum, you need highway use tax registrations for any weight-distance states you travel through (NY HUT, KYU, NM, CT, Oregon). If you operate intrastate in California, Texas, or Ohio, you also need state operating permits like CA#/MCP, TxDMV registration, or Ohio PUCO authority. Our Big Four Bundle covers the most common trucking permits for interstate carriers.

How much does commercial truck permit filing cost?

Commercial truck permit filing costs vary by state. Individual state trucking permits start at $75 for a single highway use tax registration. Our Big Four Bundle (NY HUT + KYU + NM + CT) is $149 - saving over 50% versus filing each state separately. Oregon Weight-Mile setup is $299, and California Compliance Gold (CA# + MCP) is $375. All prices are flat fees with no hidden costs.

Do I need an oversize overweight permit for my truck?

Oversize overweight permits are required when your vehicle or load exceeds standard legal dimensions or weight limits set by each state. This is separate from highway use tax and weight-distance permits. If your truck or load exceeds 80,000 lbs GVW, or exceeds standard width (8.5 ft), height (13.5 ft), or length limits, you need an oversize overweight permit for each state you travel through. Contact us for state-specific oversize overweight permit requirements.

What is a highway use tax and which states require it?

A highway use tax is a mileage-based tax imposed on heavy commercial vehicles using state highways. New York and Connecticut both call theirs HUT (Highway Use Tax), Kentucky calls theirs KYU, New Mexico has a Weight & Distance Tax, and Oregon has a Weight-Mile Tax. These are separate from IFTA fuel taxes and must be registered before your first trip in each state. Failure to register for highway use tax results in fines of $500 to $25,000.

What are state operating permits for trucking companies?

State operating permits grant legal authority to operate commercial vehicles within specific states. California requires a CA# (operating authority) and Motor Carrier Permit (MCP). Texas requires TxDMV registration for intrastate motor carriers. Ohio requires PUCO authority for intrastate operations. These state operating permits are separate from your federal USDOT number and MC authority, and must be obtained before operating commercially in those states.

FastPermit.Permits

Permits

Home/Permits/Georgia

GA · Georgia

Georgia 72-Hour Trip Permit Registration - Filed For You.

Carriers operating in Georgia must obtain proper permits before their first trip. FastPermitFiling handles your 72-Hour Trip Permit registration with Georgia Department of Transportation (GDOT).

File My Georgia Permit

Filing Agency

Georgia Department of Transportation (GDOT)

Permit Types

72-Hour Trip PermitInterstate Commerce

Georgia Compliance Facts

Georgia enforces federal weight limits and requires trip permits for non-apportioned vehicles.
Georgia has weight enforcement on I-75, I-85, I-20, and I-16 - high-traffic freight corridors.
GDOT coordinates with FMCSA for compliance checks at the GA/FL and GA/SC border crossings.

Georgia Pricing at a Glance

Flat-rate filings with no recurring fees and no surprise charges. All prices below include our preparation work, the agency filing with Georgia Department of Transportation (GDOT), and digital credential delivery.

Single Permit

$75

One Georgia filing — any single permit type above. Flat fee, one-time.

Best Value

72-Hour Trip Permit

$85

Single-crossing fuel/trip permit valid for 72 hours. Digital delivery — printable within hours.

Big Four Bundle

$149

NY HUT + KYU + NM W&D + CT HUT — four weight-distance states in one order.

“We had a load headed through Georgia on 24 hours' notice. FastPermitFiling had the 72-Hour Trip Permit credential in my driver's hand before dispatch rolled the truck. No panic, no weigh-station surprises — exactly what I pay for.”

J. Ramirez

Owner-operator · 2-truck fleet

Georgia Permit FAQ

How fast can I get a Georgia 72-Hour Trip Permit?+

Most Georgia permit orders placed before 2:00 PM ET are filed the same business day. Temporary trip permits typically deliver within a few hours; state authority and weight-distance accounts (which require agency provisioning at Georgia Department of Transportation (GDOT)) are usually live within one to three business days.

Do I need a Georgia permit if I'm just passing through?+

If any portion of your route touches Georgia — including pickups, drop-offs, or simple through-traffic on interstate highways — you must carry the applicable Georgia credentials. A 72-hour trip permit is the fastest way to stay compliant for single crossings without enrolling in the full GA tax program.

What happens if I operate in Georgia without the right permit?+

Georgia law enforcement at weigh stations and ports of entry can issue civil penalties, place your vehicle out-of-service, and report the violation to FMCSA — which feeds into your CSA score. Fines vary by permit type and load, but typically start at several hundred dollars per trip and escalate quickly for repeat violations.

Is the Georgia permit tied to my USDOT or my truck?+

Most Georgia credentials are tied to the motor carrier (USDOT / MC number), not an individual tractor. That means you generally don't need to re-file when you swap trucks inside your own fleet — but your lease operators and owner-operators should each verify that the permit on file covers the specific equipment they are running.

What does FastPermitFiling charge for Georgia?+

Standalone Georgia permits start at $75 for single-state filings and $85 for 72-hour trip permits. Multi-state bundles (like the Big Four: NY + KY + NM + CT) are $149 flat. All prices include the agency filing, our preparation work, and credential delivery — no hidden renewal fees, no bait-and-switch surcharges at the end.

Continue Your Route — States Bordering Georgia

Most carriers filing for Georgia are crossing into (or out of) a neighboring state on the same trip. We file permits for every state below — order them together and we'll batch-process your credentials.

Alabama

AL · 72-Hour Trip Permit

Florida

FL · 72-Hour Trip Permit

North Carolina

NC · 72-Hour Trip Permit

South Carolina

SC · 72-Hour Trip Permit

Tennessee

TN · 72-Hour Trip Permit

Ready to File Your Georgia Permit?

Select your package on the main page - our team handles the rest. Credentials delivered same business day.

View Georgia Permit Packages